Paragon Kiln Express E-10A 120 Volt
8.5"W x 9.0"H x 8.75"D 2000°F Max Temp 1
20 Volts / 1 Phase / 60 Hz 15 Amps 1800 Watts
Sentry 3-Key Controller
Paragon Kiln Express E-10A 120 Volt
The digital Xpress-E-10A fires to 2000°F- ideal for enameling, china painting, glass art and jewelry. The digital Sentry Xpress controller includes temperature hold, making this kiln suitable for silver clay. The 3-key digital controller is in the base of the 120 volt kiln. The front control panel is tilted for easy operation of the digital controller. Because this electric front loading kiln no longer has the side-mounted switch box, it saves tabletop space.
Unlatch and open the door with one hand; the latch operates so smoothly that delicate copper enameling or silver clay pieces remain undisturbed while opening or closing the door.
The door of the 120 volt kiln opens smoothly on a heavy-duty 1/2” hinge shaft. The firebricks in the electric front loading kiln store heat for quick temperature recovery after removing a copper enameling piece.
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.
Features of the Sentry Xpress 3-key Controller on the Paragon Xpress-E-10
Design programs with up to 8 segments (steps) in Ramp-Hold mode.
Fire to a single temperature at a single speed in the simplified Single Segment mode.
Ramp-Hold mode can store 4 programs.
Skip Segment feature in Ramp-Hold mode
Temperature hold
The Sentry Xpress can control both heating and cooling.
Program Review lets you check that the program you are about to fire is correct.
Temperature Display throughout firing and cooling in your choice of °F or °C
Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
12 Month Warranty
LED Lights show whether you are in program, review, or firing mode.
The heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace. It needs no element pins. Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.
The Xpress-E-10 120 volt kiln can now ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that your electric front loading kiln will arrive safely.
Specifications
Max. Temperature
|
2000F 1093C
|
Amps
|
15
|
Phase
|
1
|
Watts
|
1800
|
Nema
|
5-15R
|
Breaker Size
|
20
|
Circuit Copper Wire Size
|
12 gauge
|
TUV tested to CSA and UL Standard 499
|
Y
|
CE
|
N
|
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
|
Control Type
|
![](https://www.paragonweb.com/files/controltypes/smSentry-Xpress-4-June2012W15.jpg) Sentry Xpress 4.0 Digital 3-Key
|
Voltage
|
120
|
Hertz
|
60
|
Nema Details
|
![](https://www.paragonweb.com/files/nema/5-15R.jpg)
|
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.
|
|
Kiln Type
|
Front Loading Square
|
Sides
|
4
|
Understanding Chamber Measurements
|
![](https://www.paragonweb.com/images/dimen_front_square.jpg)
|
Chamber Volume
|
0.39 CU.FT. 11.04 litres
|
Chamber Width
|
8.50 IN 216 mm
|
Chamber Depth
|
9.00 IN 229 mm
|
Chamber Height
|
8.75 IN 222 mm
|
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
|
Outer Size
|
14.00W x 18.00D x 20.50H Inches 356W x 457D x 521H mm
|
Ship Size
|
28.00W x 21.00D x 24.00H Inches 711W x 533D x 610H mm
|
Ship Weight
|
74.00 Lbs. 33.57 Kg.
|
Ship Method & Notations
|
This Kiln Ships Via UPS
|
|
|
|
|
|
|
|