THE GLECO TRAP GT43 43oz. Complete Package
Maximize your volume capacity in small spaces with the GT43 Package. This package requires a minimum space of just 13″ from waste line to floor (14.5″ recommended). Most household and commercial sinks are equipped with U-shaped plumbing traps, commonly known as p-traps. Located beneath sinks in kitchens and bathrooms, this device traps water to prevent gases from entering the residential and commercial buildings. For sinks servicing medical, dental and optical offices, the jewelry industry, ceramic studios and similar applications involving a concentration of solids, or loss of valuables down the drain, The Gleco Trap has proven to be very successful.
To be economical and efficient, the maintenance on the plumbing trap must be easily and quickly performed. Current state-of-the-art equipment, however, did not offer a solution. Introducing The Gleco Trap The Gleco Trap installation process is easy. The Gleco Trap is connected below the sink and collects solids in a bottle, which has a fill line. When the solids reach the fill line, the trap is drained through a valve, the bottle is exchanged with a replacement bottle, the valve shut and the trap is back in service.
Bottle exchange is rapid and done without the need of tools. Most of all, there is no mess and less chance of water spillage.
Features
Gleco Trap Complete Packages come with the following materials to aid with Gleco Trap installation.
- Extra Bottle with Lid
- 1 1/2" x 8" sink tailpiece
- 1 1/2" trap tailpiece
- (2) 1 1/2" slip-joint washers
- (4) 1 1/2" slip-joint nuts
- 1 1/2" flat washer
- Extra O-Ring Complete instructions.
Technical Specs
Key Benefits of The Gleco Trap
Adapts easily to existing plumbing, wherever there is a p-trap.
Smaller bottle means less odors created or emitted from the trap.
Translucent bottle enables you to see the contents of the trap at any time.
Fill line easily and quickly shows when the trap needs to be serviced.
Drain valve eliminates spillage by allowing all the water above the bottle to be drained prior to removal.
Replacing the bottle takes less than 2 minutes, from start to finish, with no tools, no spills, and no contact with the solids inside The Gleco Trap.
and can easily be installed in commercial or residential buildings.