Wiziwig Potters Profile Rib: Tumbler Makin' Edna XL

Wiziwig Profile Rib : Tumbler Makin' Edna XL

Tumbler Makin' Edna pottery throwing rib makes a 16 ounce tumbler, 8" tall by 3.25" wide. Use 1.5 pounds of clay.

By using these Wiziwig potter's ribs with distinct profiles, you can easily throw the sets of cups and bowls on the potters wheel that have the same shape. You can modify the width of the pieces as desired but the nice thing is that when you view your finished items they will all have the same height and profile.

Each rib has 2 different sides for two versions of your pots. They also have notches for smoothing the foot and rim of the pieces to clean and comfortable shapes.

Wiziwig profile ribs were created by a potter with an artist's eye so they help you create beautiful and graceful forms just awaiting your finishing touches, glazing, and firing !

Instructions for Using Profile Ribs:

1. On a Pottery Wheel, Throw a Cylinder similar to the Dimensions and Weight listed for your Specific WiziWig Rib.
2. With One Hand on the Inside of the Cylinder and the other Holding your WiziWig Rib to the Outside of the Cylinder, Press your Rib into the Cylinder, while Applying Gentle Outward Pressure with your Inside Hand, Forming it to your WiziWig Rib Profile Shape.
3. Gently do this until a Continuous, Smooth line of Clay touches your Rib. Be Sure to Add Water.
4. For a Nice, Rounded Rim, Choose a Rim Size located at the Bottom of your WiziWig Profile Rib and Place Over your Rim with Very Gentle Pressure.

Leave As Is or Add your Own Wiz to Personalize.